QG serial airflow type spray dryer
QP serial spray dryer
FGF serial square-type
 airflow — fluid-bed drying unit
ZL serial fluidized bed dryer
QJD batch heating agitator drier
QF serial reinforced boiling
 pneumatic dryer

XSZ serial cyclone explosive
 boiling drier

RP serial spray dryer
QIF type internal heat agitation
 fluid-bed drier

WPG micro-airflow spray dryer
Double sodium acetate drier
QLD serial fluidized-bed
  type jet mill

QS serial horizontal disc jet mill
JCF mechanical disintegrator
 series

JCL320 biaxial microgrinder
QON circulating pipe jet mill
QBN450 type target-like jet mill
hammer type mechanical
 disintegrator

microgrinder
FYW classifier series
JCW616 super-micro hammer
 mechanical disintegrator

FQZ serial classifier


            FYW GRADER

OPERATING PRINCIPLE:
The feed which is sent to the rotary valve door at the upper tube through a feeder and transported to the grading chamber by rotary valve is dispersed and classified fully at grading rotor which are installed horizontally. The coarse particles are thrown to the tube wall and go down along the tube wall. Owing to the action of dual air and firstary air of central tube at fan, the fine powder mixed in the coase is sent to the rotor for classification. At leat, the coarse particles go down along the tube wall and are dischanged from the rotary valve of lower tube, the fine ones are discharged from the exhaust pipe through the gap of the rotor blade. The returing tail gas discharged from wind maching to free air in the collector.
Features:
The grader is a dry type air grading machine, which is equipped with dual airinlet and horizoutally installed grading rotor and being of a centrifugal type. It is strong in wear-resistance. long in service-life, generally applicable to the classification of free-materials.
Substances which are even uneasy to be dispersed in the air obtain coarse and fine powder with optimal clean degree.
It attains a wide grading range. It is selective in a rang of d97=10um. The maximan production capability comes to 8t/h, being widely used in the cement industry.
It can classify different particles either in ball or slice or fibrous shape and being able to separate materials with different densities.
High degree of grading particle d75/d25=1.1-1.5.
high grading efficieney, newton efficiency η=60-90%.
Compact construction. The size of the grading particle diameter is easy to e adjusted. It is also convenient in assembling, operation, maintenance and cleaning. It also occapies a very small area being small in vibration.
Powerful production capability, while operating at d97=10um, the capability can reach 1000kg/h approx. It can unitedly operate with other machinery mill to obtain fine powder.
               FLOW DIAGRAMMATIC SKETCH

1 Elevator
2 Storage bin
3 Screw feeder
4 Cyclone collector
5 Star valve
6 FYW classifier
7 Butterfly valve
8 Pulsed bag collector
9 High pressure fan
10 Noise eliminator

Main Technical Parameters

Index model
FYW300
FYW400
FYW630
FYW1000
DIAMETER OF ROTOR(mm)
150
200
315
500
POWER OF ROTOR MOTOR(kw)
4
5.5
11
15
CAPACITY(kg/h)
20-200
50-400
200-2500
1000-8000
MAX.REVOLUTION(r/min)
8000
6000
4000
2400
AIR VOLUME(m3/min)
12.9
16.6
42
125
MAIN MACHINE SIZE(mm)
850X700
X1120
1030X840}
X1600
1080X1200
X1744
2280X1626
X2808
WEIGHT(kg)
300
400
600
2130
FAN POWER(kw)
11
18.5
55
D97
4-80
5-120
6-150
8-150
Back
opyright(C)2004 , JIANGYIN DESICCATION ENDINE FACTORY All Rights Reserved.
Supported by ChemNet ChinaChemNet Toocle